Free shipping for orders over $39

7 steps for led car door light projector custom

A LED car door light projector is a small device that is installed in the door of a car and projects a custom image or logo onto the ground when the door is opened. The device typically uses LED lights and a lens to create a sharp and bright image, and it is powered by the car's electrical system or by a small battery.

LED car door light projectors can be customized with a variety of images, such as the car manufacturer's logo, sports team logos, or personal designs. Some models also feature motion sensors that activate the projector when someone approaches the car, creating a dramatic visual effect that is sure to turn heads.

In addition to providing a unique and stylish touch to a car's exterior, LED car door light projectors can also enhance safety by providing additional lighting when entering or exiting the vehicle at night. They are relatively easy to install and are available in a wide range of styles and designs to suit almost any taste or preference.

7 steps for led car door light projector custom

led car door light projector custom steps

A LED car door light projector can be customized with a variety of images, logos, or designs to create a unique and personalized touch to a car's exterior. Here are the steps to customize a LED car door light projector:

  1. Choose your design: Decide on the image, logo, or design you want to use for the projector. You can create your own design or choose from a variety of pre-made designs available online.

  2. Create the artwork: If you are creating your own design, use a graphic design software program to create the artwork. Make sure the image is high-quality and has a resolution of at least 300 DPI to ensure a clear and sharp projection.

  3. Print the artwork: Print the artwork onto a transparent film using a high-quality printer. You can also have the artwork printed professionally at a print shop.

  4. Cut the film: Use a sharp pair of scissors or a utility knife to cut the film to the size of the projector lens.

  5. Install the film: Open the projector and place the film over the lens, making sure it is centered and aligned properly.

  6. Test the projector: Close the car door and turn on the projector to make sure the image is projected clearly and sharply onto the ground.

  7. Final installation: Secure the projector back into the door and make sure the wiring is properly connected to the car's electrical system.

LED car door light projectors can be customized with almost any design or logo, allowing car owners to express their individuality and make their vehicle stand out from the crowd

Leave a comment

Please note, comments must be approved before they are published